
Artpical Satan Review: The Devil’s Harmony
Artpical is one of my most favorite brands as it’s so artistic and unique but also incredibly well-performing in sound. And considering how underrated these are, using Artpical products makes it even more special – although I wish they would gain more attention for the quality they deliver. Today we’re reviewing the Satan, the new flagship that sits at the top of Artpical’s line-up, as well as the dual flagship with Artpical Michael – their first debut IEM.
Satan is a 10-driver tribrid IEM, using 2 dynamic drivers, 4 balanced armatures, and 4 micro-planar drivers per side, and is priced at $1,500. Let’s start with the specs and features, then find out how this fallen angel sounds.



As Always – The Artful Packaging
The packaging box is very interesting and obviously has that demonic theme to it, with the Satan logo built in. The box isn’t too large, with bright red patterns laid over a dark black body. The top cover has a round, transparent red window that reveals the Satan logo, which gives a nice first impression even before opening the lid. Inside, the earpieces, cable, and eartips are each placed in their own compartments. The included accessories are great. Other than the earpieces, Satan comes with a 4.4mm stock cable, a leather case, and three types of eartips: white wide-bore tips, grey narrow-bore tips with memory foam inside, and transparent liquid silicone tips, the Artpical Slime eartips.

Techs Behind: 10-Drivers, 2DD+4BA+4MPD
As any Artpical products are, the Satan earpieces are built like a piece of art. Satan uses a tribrid setup with 10 drivers per side: dual dynamic drivers (10mm + 6mm), 4 Knowles balanced armatures, and 4 micro-planar drivers. For those who aren’t familiar, micro-planar drivers (MPD) are miniaturized planar drivers built in a balanced armature form factor, and Satan uses them as the tweeters. These drivers are bound with a 5-way crossover across the three driver types.

Hand-painted, Layered Earpieces
The shell is 3D-printed in resin and then hand-painted, giving that layered look and depth. Satan’s design builds upon something shown from Artpical Lucifer, and got even more lavish and demonic in looks. It has 3D swirls of patterns covering the entire earpieces, with a black and red color combo in a wide range of red gradients. The faceplate has the round Satan logo, with the hole in the middle serving as the air vent. It’s absolutely beautiful, and the 3D earpiece design makes it look majestic.

The Fit & Wear
The fit is actually great thanks to the ergonomic round shape on the inner side. The earpieces are actually on the smaller side considering the number of drivers, and despite using large dynamic drivers. Nozzle length and size are also adequate for comfort and long-term usage. For your interest, the nozzle grills are also patterned, using a uniquely modified version of the Artpical logo.
Specifications of Artpical Satan:
• Drivers: 2DD (10mm + 6mm) + 4BA (Knowles) + 4 Micro-Planar per side
• Crossover: 5-way
• Shell: 16K 3D-printed resin, hand-painted
• Vent: Heptagram pressure-relief vent (1.2mm)
• Impedance: 12.4Ω
• Sensitivity: 109.6dB/mW @1kHz
• Frequency Response: 20Hz – 40kHz
• Connector: 0.78mm 2pin
• Price: $1,500


Custom-grade Stock Cable
Satan comes with a grey-colored, custom-grade stock cable. It uses 6N single-crystal copper in a 4-braid structure, where each braid is individually shielded with its own independent grounding. The conductors are thickened to 0.6mm, and the cable is 1.2m long, terminated in a 0.78 mm 2-pin and a 4.4mm balanced plug.
All parts are made of metal in a deep red color that matches nicely with Satan. The Y-split design is inspired by Satan’s head thorns, with the middle round part serving as the chin slider. The cable is only a tad thicker than average normal cables, so the usability and weight are very nice. There are no issues using it for everyday carry and for easy portability.
Next Page: In-depth Sound Impressions



